3-12cbm Cement Mixer Transit Mixer Concrete Mixer Truck
Model NO.: CTM3-CTM12
Drive Mode: 8x4
Maximum Horsepower: 300-400hp
Condition: New
Vehicle: Dongfeng,Beiben,Sino
Trademark: Truemax
Specification: ISO9001: 2000 and CE CERTIFICAT
Origin: China
HS Code: 8479109000
Model NO.: CTM3-CTM12
Drive Mode: 8x4
Maximum Horsepower: 300-400hp
Condition: New
Vehicle: Dongfeng,Beiben,Sino
Trademark: Truemax
Specification: ISO9001: 2000 and CE CERTIFICAT
Origin: China
HS Code: 8479109000
1.  Closed loop hydraulic system and constant hydraulic oil temperature controller are used. Key hydraulic accessories include: hydraulic plunger pump, adjuster mechanism with servo, hydraulic motor and reducer are all made by internationally known brands and offer stable and reliable and reliable performances.
2.  Pneumatic Water Supple System. The pressure is provided by the air tank on the chassis with pressure protection devices .The Water inlet connector fits for both normal water pipe and fire fitting.
3.  Multi-outlet washing design. Cleaning requirements are met by the three fixed pipes for washing the agitator drum ,charging hopper and discharging hopper respectively ,and another flexible water outlet.
4.  Three-point Operation System. One in the cab to allow control of the agitator drum to turn forward and reverse, and to perform the "feed" ,"discharge", "agitate" and "stop" functions .Two at the rear with one operation handle at each side to perform "charge" "accelerate" ,"discharge" ,"agitate" and "stop" .Three are interlocking.
Â
| SPECIFICATIONS | 7M³ | 9M³ | 10M³ |
| Geometric volume of drum(m³) | 11.3 | 14.91 | 16.2 |
| Mixing capacity(m³) | 7 | 9.64 | 10 |
| Material of blades/drum | Q345MN | Q345MN | B520JJ |
| Inclination angle for drum(@) | 15 | 12 | 13 |
| Padding rate(%) | 61.94% | 64.65% | 63% |
| Residual rate(%) | <0.16% | <0.16% | <1% |
| Charging speed(m³/min) | ≥3 | ≥3 | ≥3 |
| Discharging speed(m³/min) | ≥1.2 | ≥1.2 | ≥2 |
| Mixing speed(r/min) | 50-220 | 0-14 | 70-260 |
| Capacity for water tank(|) | 350 | 350 | 350 |
| Air pressure(mpa) | 0.4 | 0.4 | 0.4 |
| Max.External diameter of drum(mm) | 2118 | 2342 | 2432 |
| Length of the drum(mm) | 3868 | 4764 | 4811 |
| A Upper-fixing Length(mm) | 5930 | 6600 | 6685 |
| B Subframe Length(mm) | 5090 | 5760 | 5575 |
| C Chute Position(mm) | 840 | 840 | 850 |
| D Center of Gravity when Fully Load(mm) | 2385 | 2695 | 2750 |
| E Hopper Height(mm) | 2500 | 2570 | 2660 |
| F Upper-fixing Height(mm) | 2565 | 2635 | 2785 |
| Overall dimension(L*W*H/mm) | 5930*2490*2565 | 6600*2490*2635 | 6685*2490*2785 |
| Weight(Kg) | 3900 | 4500 | 5000 |
| Water supple | Air pressure | Air pressure | Air pressure |
1.  Closed loop hydraulic system and constant hydraulic oil temperature controller are used. Key hydraulic accessories include: hydraulic plunger pump, adjuster mechanism with servo, hydraulic motor and reducer are all made by internationally known brands and offer stable and reliable and reliable performances.
2.  Pneumatic Water Supple System. The pressure is provided by the air tank on the chassis with pressure protection devices .The Water inlet connector fits for both normal water pipe and fire fitting.
3.  Multi-outlet washing design. Cleaning requirements are met by the three fixed pipes for washing the agitator drum ,charging hopper and discharging hopper respectively ,and another flexible water outlet.
4.  Three-point Operation System. One in the cab to allow control of the agitator drum to turn forward and reverse, and to perform the "feed" ,"discharge", "agitate" and "stop" functions .Two at the rear with one operation handle at each side to perform "charge" "accelerate" ,"discharge" ,"agitate" and "stop" .Three are interlocking.
Â
| SPECIFICATIONS | 7M³ | 9M³ | 10M³ |
| Geometric volume of drum(m³) | 11.3 | 14.91 | 16.2 |
| Mixing capacity(m³) | 7 | 9.64 | 10 |
| Material of blades/drum | Q345MN | Q345MN | B520JJ |
| Inclination angle for drum(@) | 15 | 12 | 13 |
| Padding rate(%) | 61.94% | 64.65% | 63% |
| Residual rate(%) | <0.16% | <0.16% | <1% |
| Charging speed(m³/min) | ≥3 | ≥3 | ≥3 |
| Discharging speed(m³/min) | ≥1.2 | ≥1.2 | ≥2 |
| Mixing speed(r/min) | 50-220 | 0-14 | 70-260 |
| Capacity for water tank(|) | 350 | 350 | 350 |
| Air pressure(mpa) | 0.4 | 0.4 | 0.4 |
| Max.External diameter of drum(mm) | 2118 | 2342 | 2432 |
| Length of the drum(mm) | 3868 | 4764 | 4811 |
| A Upper-fixing Length(mm) | 5930 | 6600 | 6685 |
| B Subframe Length(mm) | 5090 | 5760 | 5575 |
| C Chute Position(mm) | 840 | 840 | 850 |
| D Center of Gravity when Fully Load(mm) | 2385 | 2695 | 2750 |
| E Hopper Height(mm) | 2500 | 2570 | 2660 |
| F Upper-fixing Height(mm) | 2565 | 2635 | 2785 |
| Overall dimension(L*W*H/mm) | 5930*2490*2565 | 6600*2490*2635 | 6685*2490*2785 |
| Weight(Kg) | 3900 | 4500 | 5000 |
| Water supple | Air pressure | Air pressure | Air pressure |
Corrosion Resistant Submerged Pump
Corrosion-resistant submerged pumps rely on atmospheric pressure to raise the water level. With the movement of the piston, an approximate vacuum is created, and the water is forced up by the external atmospheric pressure. In principle, it can be divided into pneumatic pump, Centrifugal Pump, axial flow pump, mixed flow pump, screw pump and so on.
Corrosion Resistant Submerged Pump,Submerged Pump,Submerged Water Pump,Submersible Centrifugal Pump
Jiangsu Qiantu Trading Co., Ltd. , https://www.jsqtpumptrade.com