60,000 or less seven-seat commercial car Xenia M80
Although almost everyone in China now has a private car, for those families who do not have much savings, the luxury joint venture cars or high-end self-owned brands are not suitable for them and are not practical. In contrast, the low-end vehicles with their own brands are more suitable for mass users. They have conquered the majority of users with ultra-high cost-effectiveness, good appearance and superior practicality.
The FAW Senya M80 is less than 60,000 and is a classic MPV for the public.
Equipped with a 1.3L/1, 5L naturally aspirated engine, imported from Japan, DWT engine, engine tuning is suitable for low speed driving, such as city streets, approximately 60KM/H-80KM/H. Horsepower is not as strong, but it is enough for everyday use.
The appearance is a bright spot for FAW Senya , simple but without losing the atmosphere, especially the roof racks on both sides of the roof, adding a bit of sporty atmosphere for Senya. For such a small car, his interior space is really worthy of praise. The last row did not place seats. The original intention is to carry large cargo. The second row of seats feels very good, and there is no pressure to ride. . Shock absorption and suspension adjustments are also just right. The front McPherson, rear monolithic bridge, also added five links to improve ride comfort.
FAW-Senya has a slightly cheaper layout due to cost control. The material is mostly hard plastic, and it is not equipped with a multi-function steering wheel. All cars are manual air conditioners, but the design buttons are very reasonable and easy to operate. The car's power performance is still OK, in the case of low speed, the speed increase is still very obvious, it can be seen that this too engine should be low speed and high torque. In the case of 80 km/h cruising, the feeling of further acceleration is also possible. Daily overtaking is sufficient.
For the majority of grass-roots people, the Xenia M80, whether it is power equipment, appearance appearance, space reserve, space utilization are very suitable for people's lives, can be used to pull the goods can also go out with a family to play. Widely used, cheap, and low fuel consumption to 7 liters 100 kilometers. It is a good choice for people who pursue economic benefits.
Main feature of anchor mining drilling machine:
1, The anchor drill rig with full hydraulic control, Operation is convenient and flexible, easy shifting, good maneuverability, saving time and labor.
2, Drill rotary machine driven by a double hydraulic motor, High output torque, rotary center lower than similar products, greatly improving the rig drilling rig stability.
3, New variable angle mechanism to make the hole more convenient, adjustment range is larger, can reduce the requirements of the working surface.
4, For the customer's local special conditions, the cooling system is optimized to ensure that the hydraulic system when the outdoor temperature is 45 ° C, the maximum temperature does not exceed 70 ° C.
5, Match dedicated simultaneous casing drill tools (drill pipe, casing, eccentric bit, etc.), in the unstable formation with casing wall openings, the conventional button bit use for end-hole . High drilling efficiency , and good quality.
6, Machine is mainly suitable for deep foundation pit anchor support, but also through the rotary spray module replacement, so machine can be rotary jet spray construction.
7,The mining drilling machine can meet three-wing drill drilling, DTH hammer drilling, casing drilling, drill pipe / casing complex drilling, single / double/ triple rotary spray, fixed spray, swing spray and so on .
Top Drive Drilling Rig,Top Drive Drilling,Top Drive Rig,Top Drive In Drilling Rig
JIANGSU XI TEC ENVIRONMENTAL&DRILLING EQUIPMENT COMPANY CO.LTD , https://www.sjxitecdrilling.com