Automobile 4S shop model will change

Zeng Qinghong, general manager of GAC Group, said recently that GAC is focusing its efforts on integrating internal resources and promoting the joint building of three brands, namely Chuanqi, Fiat and Mitsubishi, to reduce the market risk of new projects. According to Zeng Qinghong, the three brands currently have a small amount of inventory. Sales shops must have the support of service revenue to survive. Therefore, the brand exhibition hall is independent, but a new channel model for sharing service resources is adopted.

The 4S shop model was first introduced by Guangqi Honda to the domestic market. This model is more conducive to manufacturers' control over dealers. However, it should be noted that the premise of this control should be that the market situation is good and both parties should make money. If the dealers lose money for a long time, the manufacturer must also assign tasks rigorously and gesticulate them, then it is very likely that the existing 4S shop model will suffer a greater impact.

In fact, with the rapid development of the domestic automobile industry, the competition among auto companies has become increasingly fierce, and some weak brand 4S stores have been struggling for a long time. Under such circumstances, if auto companies still blindly demand that investors establish large-scale 4S stores, they will certainly incur strong opposition.

As early as a few years ago, Suzuki and Mitsubishi Motors had tried to sell their imported cars and domestic cars together, but the two companies did not do a good job of research, but simply put different brands of cars in the same 4S shop. However, they ignored the interests of the different auto groups that were in joint ventures with them, so this attempt was eventually lost.

The GAC Group's approach is different. It adopts a model of independent exhibition halls but shares service resources. This model is similar to the United States. In the United States, supermarket-style car sales shops are the mainstay. Maintenance and after-sales services rely on manufacturers' maintenance facilities established around the country. This greatly reduces the investment risk of investors.

The production relationship must adapt to productivity. This is one of the most universal principles of Marx's political economy. As a production relationship, the automobile sales model must also adapt to the productivity of the corresponding period. In the past decade, the Chinese automobile market has experienced rapid development. Among them, the 4S model has a special contribution, but the high operating cost of 4S stores is an indisputable fact.

In fact, in recent years, some car companies have begun to allow investors to reduce the size of their stores, and the way the GAC Group proposes to share service resources among the three brands is indeed an innovation in a competitive environment. Any kind of sales model can not be the same, perhaps, the future by the manufacturers to establish a special maintenance station, investors reduce the size of the store and other coexistence of multiple modes of operation will be one of the future direction.

Industrial Fan

Product Profile Large energy saving ceiling fans are green energy saving products of the 21st century. It has many advantages, such as powerful, no noise, zero pollution, low energy consumption. It is very popular for large masses of users. It is not only mainly used in steel structure plant, logistics warehouse, farm and other large enterprise buildings, but also agricultural markets, gymnasiums, waiting rooms, exhibition halls and other large public buildings. A large energy-saving ceiling fans with a speed of 50 revolutions per minute 1 to 3 meters per second to make the human body feels the best wind speed. A breeze from all directions gently caresses the body and increases the evaporation of human sweat. The cooling effect of 5 to 8 degrees is similar to the comfort presented by the natural breeze, which can not be matched by other fans. It is an ideal choice for indoor, ventilation and cooling in summer to remove humidity and heat. Only seven degrees of electricity per day, it can be cool for a whole summer. Energy saving comparation In summer, the sun shines directly and the indoor temperature is more than 40 degrees on average. Common industrial exhaust fans can only increase the indoor temperature. Industrial air conditioners consume thousands of kilowatts of energy every shift. There is no obvious unenclosed cooling in the space, which also increases the operating cost of enterprises. The emergence of a large energy saving ceiling fan brought the perfect solution. An energy saving fan with a diameter of 7.2meters can push the air to produce a large amount of winds effectively. The continuously rotating blades of circular form an airflow field with an effective area of 600 to 800 square meters. No other device has not yet been compared. The large energy-saving ceiling fan praduced by Linter technology has the characteristics of high reliability, feasibility and low power consumption. The controller unit used the stability of the energy-saving inverter system. In practice, the average power consumption is less than one killowatt per hour. It can guarantee more than 5,000 hours of uninterrupted operation. Linter7200 of a large energy-saving ceiling fan can cover the area of about 50 small fans of 0.75 megabytes worked. In a factory of 9000 square meters, if full coverage is to be achieved, it needs about 300 small fans or industrial 6 energy-saving fans. According to the use of four years, every eight months, every day for ten hours, can be run for 10,000 hours, about 90000kw power consumption, than the small wind 1080000kw, save 990000kw, save energy by 92%. When meeting the extreme high temperature climate, the large energy saving fans and air conditioners are used together, it will be coller. Using A large energy-saving ceiling fan for air supply can not only save the air conditioning tube, but also save more than 30% energy. Attentio Lectotype The building structure: H-shaped steel, I-shaped steel, Mixed steel square bar spherical column spherical structure. The total height of the building is more than 4, 0m, less than 15m. 1, 0m. The minimum distance between the fan and the roof is 1, 0m. The minimum safety distance between the fan blades and the obstacle is 0, 3 m. The distance between the fan blades and the wall on both sides is more than 1, 5 m. Effects of various environments on fan performance. Open space, promotes air circulation. Indoor airflow circulation in enclosed spaces is suitable for use with air conditioning. In a multi-fan environment, due to the low wind speed, caused by the fan, there will be no cyclones. The distance between the two fans will be separated before the wind will not cancel, and the coverage area will be increased at the same time. Company Information HongFa automatic door Technology (Shenzhen) Co., Ltd is a high-tech enterprise which engages in the development of advanced world-class automatic doors. Our main products include industrial fast rolling door, industrial PVC rolling door, industrial PVC rolling door, fast rolling door, rolling door, fast rolling door, rolling door, industrial automatic lifting door, industrial automatic lifting door, automatic vertical hinged door, automatic stainless steel door, automatic doors, automatic doors, electric folding gate, rolling door, automatic doors, automatic doors, automatic doors, automatic doors,

Industrial ceiling fan,electric fan,industrial fan

SHENZHEN HONGFA AUTOMATIC DOOR CO., LTD , https://www.hongfahss.com