Brass Pneumatic Air Fittings Flow Control Valve

FEATURES
For other size, please refer to below table.
1. Fluid Type: compressed air (For other fluid, please contact us).   
2. Working Pressure: -0.8~15 bar.  
3. Application Tube: PU, PE, PA tubes.  
4. Working Temperature: -10~60ºC.     
 
MATERIAL CONSTRUCTION

Metal Body Nickel Plated Brass or Brass
Release Button Nickel Plated Brass or Brass
Thread Sealant Teflon
O-Ring NBR or Viton
 
SPECIFICATIONS
Operating Pressure  -0.8~15 bar.  
Operating Temperature -10~60ºC.
Application Air, water
Recommended Tubing Material Polyurethane, Nylon, Polyethylene, and Polypropylene
Types Straight, Elbow, Tee, X, Y, etc.
Capacity Over 1000000pcs/month
Marketing Area All over the world
FITTINGS ADVANTAGE
1)  Raw Material is HPB 59-1, conforms to country standard.
 
2) High precision automatic lathe to make the claws not hurt tube surface.
  
3)  5% tested by water at 10 bar, 100% tested by air and appearance test.
 
4) Easy to push in and put out on the basis of working pressure assured
 
5) 1 year quality assurance after shipment.
 
6) Custom fitting as your drawing or we make drawing as your sample.
 
 
 





FEATURES
For other size, please refer to below table.
1. Fluid Type: compressed air (For other fluid, please contact us).   
2. Working Pressure: -0.8~15 bar.  
3. Application Tube: PU, PE, PA tubes.  
4. Working Temperature: -10~60ºC.     
 
MATERIAL CONSTRUCTION

Metal Body Nickel Plated Brass or Brass
Release Button Nickel Plated Brass or Brass
Thread Sealant Teflon
O-Ring NBR or Viton
 
SPECIFICATIONS
Operating Pressure  -0.8~15 bar.  
Operating Temperature -10~60ºC.
Application Air, water
Recommended Tubing Material Polyurethane, Nylon, Polyethylene, and Polypropylene
Types Straight, Elbow, Tee, X, Y, etc.
Capacity Over 1000000pcs/month
Marketing Area All over the world
FITTINGS ADVANTAGE
1)  Raw Material is HPB 59-1, conforms to country standard.
 
2) High precision automatic lathe to make the claws not hurt tube surface.
  
3)  5% tested by water at 10 bar, 100% tested by air and appearance test.
 
4) Easy to push in and put out on the basis of working pressure assured
 
5) 1 year quality assurance after shipment.
 
6) Custom fitting as your drawing or we make drawing as your sample.
 
 
 

Intake Manifold Air Pressure Sensor/MAP Sensor

The intake manifold Pressure Sensor is referred to as MAP, which is the main component of the D-type fuel injection system of the gasoline engine. As the basis for controlling the fuel injection quantity and ignition advance angle.The working principle of the intake manifold pressure sensor is to know the density of the air by measuring the absolute pressure in the intake pipe, and to calculate the amount of incoming air according to the speed of the engine.

Intake manifold air pressure sensor,MAP sensor,Pressure Sensor

RUIAN DELLFEI AUTO PARTS CO.,LTD. , https://www.dellfei.com