Can the front, rear, and rear pallet trucks pull a 30-ton excavator?

Can the first four after eight wrecker trucks pull 30-ton excavators? Let's introduce a wrecker truck that professionally pulls a 30-ton excavator

Ford dragged the front four rear eight flatbed trucks, using Tianlong driving building, four-point suspension shock absorption design, airbag seats, electric control oil pump turning in the driving building, the engine used Yuchai six-cylinder 350 horsepower, Fast (Shaan tooth) 12 High and low speed gearbox, 5.5 tons front axle, 13 tons rear axle, 10.00R20 steel tire, 300mm (8 + 8) double-layer beam.

The slab part is fully paved with 10mm thick pattern plates, the beams are 140-type 8mm thick square tube pads, the beam spacing is 230mm-280mm, the vertical beams are 8mm thick channel steel to connect the beams, the tail double spring ladder, the ladder is made of the beam beams Strong, with a pair of legs at the bottom of the tail slope.

Automatic Shape Moulding Machine With Vacuum

Eps Shape Molding Machine,Insulated Eps Foam moulding machine,Automatic Eps Foam Machine,Fish Box Cooler Foam Machine

Zhejiang Huasheng Machinery Equipment Co.,Ltd , https://www.huashengepsmachine.com