Domestic Copper Wire Self-Priming Auto Water Pump with Pressure Sensor
Pump
>> Pump Body: cast iron & support under special anti-rust treatment
>>Â Impeller: stainless steel impeller, brass impeller, ppo impeller
>>Â Mechnical Seal: carbon / ceramic / Stainless Steel
Motor
>> Bulit-in thermal protector for single phase motor
>> Motor with copper winding
>>Â Motor Housing: Steel-plate, Aluminum alloy
>> C&U bearing
>>Â AISI 304 shaft or 45#Â carbon steel
Working Range
>> Liquid: clean liquids without suspended solids, non-aggressive
>> Liquid temperature: -10ºC and +100ºC
>> Ambient temperature up to +40ºC
>> Max. working pressure 10 bar
>> Continous service S1
>> Insulation: B
>> Protection: IP44
Advantages
>> Electronic pressure switch controlled by PC clip to avoid take off pressure switch frequently.
>> Every 72h it will start for 10s in order to avoid pump locked if long time no using pump.
>> Water protection system to avoid the pump in the anhydrous state for a long time.Â
>> Delay 3s start to avoid spark-over socket, protect the personal safety.
>>Â The flow priority system, electric pump use acme, turely achieve the full pressure.Â
Application
                                                                     | Model | HP | W | Current (A) | Capacitor (uf) | H.Max (M) | Q.Max (L/min) | Pipe Size | Pressure Set (bar) | Tank (L) |
| GDHm-125A | 0.15 | 125 | 1.5 | 8 | 30 | 32 | 1"X1" | 1.5 | 2 |
| GDHm-250A | 0.35 | 250 | 3.5 | 10 | 32 | 35 | 1"X1" | 1.8 | 2 |
| GDHm-370A | 0.5 | 370 | 4.5 | 10 | 36 | 36 | 1"X1" | 2.2 | 2 |
| GDHm-550A | 0.75 | 550 | 2.9 | 15 | 45 | 55 | 1"X1" | 2.6 | 2 |
| GDHm-750A | 1 | 750 | 3.5 | 20 | 55 | 58 | 1"X1" | 2.8 | 2 |
| GDHm-1100A | 1.5 | 1100 | 4.5 | 25 | 62 | 66 | 1"X1" | 3.2 | 2 |
GDHm Automatic Self-priming Pump   Â
    Â
| Item | Description | Item | Description | Item | Description | Item | Description |
| 11 | Press Sensor | 21 | Bearing | 31 | Screw | 41 | O-ring |
| 12 | Screw | 22 | Shaft Key | 32 | Cable Plug | 42 | Pressure Tank |
| 13 | Inlet Rubber | 23 | Rator | 33 | Cable Net | 43 | Pressure Sensor |
| 14 | Stainless steel Inlet | 24 | Bearing | 34 | Screw | 44 | Cover |
| 15 | O-ring | 25 | Stator | 35 | PC Clip | 45 | Plastic Base |
| 16 | Screw | 26 | Motor House | 36 | Volatede Regulator | 46 | Screw |
| 17 | O-ring | 27 | Terminal Box | 37 | O-ring | Â | Â |
| 18 | Screw | 28 | Screw | 38 | Fan | Â | Â |
| 19 | Front Plate | 29 | Capacitor | 39 | Screw | Â | Â |
| 20 | Screw | 30 | Terminal Box | 40 | Fan Cover | Â | Â |
Production Work-flow Chart of Pump
Â
                           About Us
                                 Â
FAQ
Q: Are you trading company or manufacturer ?
A: We are factory.
Q: How long is your delivery time?
A: Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to quantity.
Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free charge but do not pay the cost of freight.
Q: What is your terms of payment ?
A: Payment<=1000USD, 100% in advance. Payment>=1000USD, 30% T/T in advance ,balance before shippment.
Pump
>> Pump Body: cast iron & support under special anti-rust treatment
>>Â Impeller: stainless steel impeller, brass impeller, ppo impeller
>>Â Mechnical Seal: carbon / ceramic / Stainless Steel
Motor
>> Bulit-in thermal protector for single phase motor
>> Motor with copper winding
>>Â Motor Housing: Steel-plate, Aluminum alloy
>> C&U bearing
>>Â AISI 304 shaft or 45#Â carbon steel
Working Range
>> Liquid: clean liquids without suspended solids, non-aggressive
>> Liquid temperature: -10ºC and +100ºC
>> Ambient temperature up to +40ºC
>> Max. working pressure 10 bar
>> Continous service S1
>> Insulation: B
>> Protection: IP44
Advantages
>> Electronic pressure switch controlled by PC clip to avoid take off pressure switch frequently.
>> Every 72h it will start for 10s in order to avoid pump locked if long time no using pump.
>> Water protection system to avoid the pump in the anhydrous state for a long time.Â
>> Delay 3s start to avoid spark-over socket, protect the personal safety.
>>Â The flow priority system, electric pump use acme, turely achieve the full pressure.Â
Application
                                                                     | Model | HP | W | Current (A) | Capacitor (uf) | H.Max (M) | Q.Max (L/min) | Pipe Size | Pressure Set (bar) | Tank (L) |
| GDHm-125A | 0.15 | 125 | 1.5 | 8 | 30 | 32 | 1"X1" | 1.5 | 2 |
| GDHm-250A | 0.35 | 250 | 3.5 | 10 | 32 | 35 | 1"X1" | 1.8 | 2 |
| GDHm-370A | 0.5 | 370 | 4.5 | 10 | 36 | 36 | 1"X1" | 2.2 | 2 |
| GDHm-550A | 0.75 | 550 | 2.9 | 15 | 45 | 55 | 1"X1" | 2.6 | 2 |
| GDHm-750A | 1 | 750 | 3.5 | 20 | 55 | 58 | 1"X1" | 2.8 | 2 |
| GDHm-1100A | 1.5 | 1100 | 4.5 | 25 | 62 | 66 | 1"X1" | 3.2 | 2 |
GDHm Automatic Self-priming Pump   Â
    Â
| Item | Description | Item | Description | Item | Description | Item | Description |
| 11 | Press Sensor | 21 | Bearing | 31 | Screw | 41 | O-ring |
| 12 | Screw | 22 | Shaft Key | 32 | Cable Plug | 42 | Pressure Tank |
| 13 | Inlet Rubber | 23 | Rator | 33 | Cable Net | 43 | Pressure Sensor |
| 14 | Stainless steel Inlet | 24 | Bearing | 34 | Screw | 44 | Cover |
| 15 | O-ring | 25 | Stator | 35 | PC Clip | 45 | Plastic Base |
| 16 | Screw | 26 | Motor House | 36 | Volatede Regulator | 46 | Screw |
| 17 | O-ring | 27 | Terminal Box | 37 | O-ring | Â | Â |
| 18 | Screw | 28 | Screw | 38 | Fan | Â | Â |
| 19 | Front Plate | 29 | Capacitor | 39 | Screw | Â | Â |
| 20 | Screw | 30 | Terminal Box | 40 | Fan Cover | Â | Â |
Production Work-flow Chart of Pump
Â
                           About Us
                                 Â
FAQ
Q: Are you trading company or manufacturer ?
A: We are factory.
Q: How long is your delivery time?
A: Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to quantity.
Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free charge but do not pay the cost of freight.
Q: What is your terms of payment ?
A: Payment<=1000USD, 100% in advance. Payment>=1000USD, 30% T/T in advance ,balance before shippment.
Automatic Sliding X-ray hospital Door
hospital door, hospital sliding door, medical sliding door , automatic medical airtigh door, clean room door ,operating theaters door
Hospital door
Medical sliding door , each door has a single whole steel plate , lined with aluminum profile inner frame and high strength honeycomb panels , surrounded by high quality stainless steel shut perfect treatment , high dimensional accuracy , closed surface made of high quality EPDM special rubber seal to be perfect seamless seal , Bao steel steel board used in all high-quality cold-rolled steel , the surface with high-quality weather-resistant color pure polyester electrostatic powder coating , its performance in line with GB5237.4-2000 standard (in line with European standards QUALICOA D), and the development of a variety of wood effect , Door Press (medical diagnostic X-ray emission prevention health protection requirements ) lining thickness corresponding stereotype . protective harness toward lining 2mmpb thickness , the thickness of the other 1mmbp protection , The vertical axis hinge design unique , different from the conventional hinge , changing the point of impact to avoid sagging door , making more durable protective door , you open smoothly
Automatic Medical Airtight Doors with airtight , Sound insulation , thermal insulation , fire protection , radiation protection
1 Using a small volume , high-power brushless DC motor , frequent opening and closing , also can be long-term trouble-free operation
2. The sides of the door equipped with professional vacuum airtight tape , using a unique compression technology to ensure the door when the door is closed with the close coordination to achieve reliable sealing effect
3. With foot switch and special handle , health care workers to open the door easily , when power outage it can be opened by handle
4. The Safety sensors can effectively prevent the clip people , also can be set to automatic door sensor drive from indoor
5. Also can be opened easily by a remote control
6. The user can set the sensor effects , the flexibility to set the sensor operation mode according to the doctor`s work habits and characteristics of various types of surgery , in order to achieve the best results
Designed for clean room environments such as hospital operating rooms , pharmaceutical production plants, precision equipment factories, food shop , laboratory access port
Technical parameters
Power Voltage : 220V/50HZ
Power consumption : <150w
Door weight :<200KG
Opening/Closing speed : 20-60cm/sec
Closed way: Auto/induction
Safety Light Beam Switch :
This is which accord with the European standards , with a completely interference immunity . Also accord with ESC standards and in line with the French government about the workplace regulations require automatic doors
Accord with German regulations concerning the outer doors of power starting
hospital door, hospital sliding door, medical sliding door , automatic medical airtigh door, clean room door ,operating theaters door
SHENZHEN HONGFA AUTOMATIC DOOR CO., LTD , https://www.hongfarrd.com