Entering Southeast Asia Shantui full hydraulic bulldozer to add new color

Recently, the Southeast Asian market has received a good news. The all-hydraulic super-wet bulldozer DH17 C2 LGP and the loader SL30WN have been placed on the market. This is the first time that the Shantui DH17 C2 LGP bulldozer has achieved a breakthrough in the Singapore market. All equipment has been shipped.

超湿地型DH17C2 LGP系列推土机
Super wet type DH17C2 LGP series bulldozer

The ultra-wet type DH17C2 LGP series is a new type of full-hydraulic bulldozer developed by Shantui for the high-end market. It uses the Weichai Guosan engine and has the advantages of high operating efficiency, environmental protection and energy saving. Singapore is a highly competitive market with strict requirements on product quality and emission standards. The Southeast Asia business unit closely follows the company's pace, focusing on the “high, low, fast and full” clerk principle, focusing on the regional high-end market, actively promoting Shantui's new hydraulic bulldozers, and using the brand advantage to recommend Shantui's full range of products to customers. Diversified sales of Shantui products.

In the follow-up, the Southeast Asian business department will continue to adhere to the sales spirit of “everything is contending, not to be allowed”, relying on the strong Shantui brand as the backing, competing with competitors on the same stage, with the principle of “customer satisfaction is our aim”. Do a good job in customer service support and contribute to the company's development. (This article is from Shantui)

Related News: Shantui Bulldozer Southeast Asia

Multi Color Molding

In the silicone industry, to meet the user experience of the majority of consumers, multi-color products have always been the best-selling products, the process is used in silicon materials bonding and plastic bonding.

1. Soft and hard plastic two-color design
The two materials must have a certain temperature difference in the melting point. Generally, it is recommended to reach 60°. It is recommended to be at least 30°. The melting temperature of the first shot material is high. Generally, the first shot is PC or PC/ABS, and the second shot is TPU or TPE, PC thickness is 0.6-0.7mm, soft rubber part thickness is required to be 0.4mm or more.
Try to widen the contact area, make grooves to increase the adhesion, or use the core for the first shot, and the second part of the material is injected into the first shot. The surface of the first shot is as rough as possible.
2. Material compatibility
Multi-color injection molded mating materials must meet two basic compatibility conditions. They are compatible with the adhesive compatibility and processing.
3. Transparent and non-transparent two-shot design
(1) Double shot design of small lenses
The first shot is non-transparent, and the second shot is made of a lens. The first shot uses a PC with a high melting point and the second shot uses a PMMA.
(2) Transparent and non-transparent bijective design for decoration
The first shot is a non-transparent material, the second shot is a transparent material, and the non-transparent material is generally a high temperature of the PC material of SABIC, and the second shot transparent material is PMMA or PC. The PC needs to be sprayed with UV to protect it. PMMA can choose uv or fortification. If there are characters on the surface, you must choose UV

In the silicon bonding area, several silicon materials will be used to achieve different color silicon, different rubber components, so the multi_k color process is commonly used and is quite popular.

IMG_0564

Multi Color Molding,Multi Colour Injection Moulding,Multi Color Injection Molding,Multicolor Injection Molding

Suzhou FCE precision electronics Co., LTD , https://www.sjfukeyifcesz.com