High Quality Tubeless Tyre Inflator Sealer
Features:
I-like tire sealer & inflator is designed to quickly seek-out and effectively seal most normal punctures and slow leaks. It is 100% applicable to breach within 6mm on tubeless rubber tyres of cars, motorcycles, electrical bicycles. No jack nor tyre-change is needed. One step procedure of tyre pumping and repairing is finished in seconds. It can also be filled into new tyres to prevent unexpected leakage. Non-toxic and odorless. No corrosion and no damage to the tire.
Uses:
Just connect, inflate & go! !
Directions:
1. If possible remove object causing puncture.
2. Deflate the tyre; Shake the can well before use;
3. Screw connecting tube firmly onto tyre valve; Hold the can upright-button uppermost-remove protector cap-press button until tyre appears firm.
4. After pumping is finished, disconnect both ends of the tube. Immediately drive 3-5km to allow the sealer to spread in tyre and mend the puncture. Then check and adjust tyre pressure.
Â
|
Item No.: |
ID-309 |
| Can Size: | 65mm DÂ x 158mm H |
| Package: | 450ml x 12pcs/ctn |
| Carton Size: | 275x205x205 mm |
| 20ft Container Loading | 2500 cartons  |
Features:
I-like tire sealer & inflator is designed to quickly seek-out and effectively seal most normal punctures and slow leaks. It is 100% applicable to breach within 6mm on tubeless rubber tyres of cars, motorcycles, electrical bicycles. No jack nor tyre-change is needed. One step procedure of tyre pumping and repairing is finished in seconds. It can also be filled into new tyres to prevent unexpected leakage. Non-toxic and odorless. No corrosion and no damage to the tire.
Uses:
Just connect, inflate & go! !
Directions:
1. If possible remove object causing puncture.
2. Deflate the tyre; Shake the can well before use;
3. Screw connecting tube firmly onto tyre valve; Hold the can upright-button uppermost-remove protector cap-press button until tyre appears firm.
4. After pumping is finished, disconnect both ends of the tube. Immediately drive 3-5km to allow the sealer to spread in tyre and mend the puncture. Then check and adjust tyre pressure.
Â
|
Item No.: |
ID-309 |
| Can Size: | 65mm DÂ x 158mm H |
| Package: | 450ml x 12pcs/ctn |
| Carton Size: | 275x205x205 mm |
| 20ft Container Loading | 2500 cartons  |
PVC Paste Resin Tianchen Brand
Tianchen company is one of the main manufacturers of paste PVC Resin in China, with an annual capacity of 130000 tons, ranking second in China. The new paste resin products pb1156, pb1172h, pb1202, pb1302, pb1702 and pb1704 introduced from Arkema company of France, the special paste resin products specially developed for pb1152c, pe1311, pb108-2, pb128 and pb158, and the special (chloroacetic acid) resin for pa70 ink adopt MSP-3 seed micro suspension technology. The paste resin product produced by MSP-3 process has the characteristics of good paste forming performance, low paste viscosity, low oil absorption and good rheological performance, which is conducive to post-processing. The typical bimodal distribution of the product and the mutual filling of large and small particles make the processed products have the advantages of good wear resistance, high strength and good foaming. Therefore, in some application fields, it has characteristics that cannot be replaced by other process route products.
paste pvc,pvc resin paste,kanevinyl paste,emulsion pvc resin,pvc emulsion resin
Henan Chuange Industry CO.,LTD , https://www.chuangegroup.com