Pneumatic Boat Rubber Airbag/Marine Airbag/Heavy Lifting Airbag
Marine Salvage Airbags in use
Marine salvage and refloatation is another application ofship launching marine airbags after update. Evergreen Maritime marine salvage airbags are designed with lifting belts and shackles equipped on the update ship launching air bags.
Marine Salvage Airbags is the toughest air lifting bags. It can be used as salvage pontoon for the supporting docks, and other floating structures. Also can be used to salvage the shipwreck, rescue the floating bridge and dock construction. It really come into own when marine salvage airbags employed in heavy duty salvage work under severe environment.
Construction Features of Marine Salvage Airbags
Marine salvage airbags is to be constructed of an out rubber layer, multilayer heavy-duty synthetic-tire-cord layers, and an inner rubber layer vulcanized firmly. It has the cylindrical balloon body, with two conical head and end mouth. Air tightness swivel and air inlet kits are screwed with end mouth.
Polyester webbing lifting straps are located symmetrically along the body of marine salvage airbags. The pick points of every strap are then connect to one screw pin shackle. The total lifting of these straps shall maintain a minimum 6:1 safety factor of the operational load.
Advantages comparing with PVC Air Lift Bags
PVC air lift bags are widely used for the diving or marine salvage industry. Evergreen Maritime marine salvage airbags are made by multilayer heavy-duty synthetic-tire-cord layers. It's more sturdy and reliability than PVC air lifting bags, which is made only by one layer PVC coating fabric.
For SUMITOMO Cylinder Seal Kit
Maintenance of Sumitomo hydraulic cylinder seals
Daily maintenance and upkeep can effectively solve the sealing problem of hydraulic cylinders, extend the service life of hydraulic cylinders, and improve the work efficiency of construction machinery.
1. Regularly check the wear of the hydraulic cylinder seals, and if severe wear is found, it should be replaced in a timely manner.
2. Clean the hydraulic cylinder seals to prevent impurities such as dust and sand from entering the interior of the seals.
3. Use appropriate hydraulic oil and avoid using expired or non compliant hydraulic oil to avoid damage to the hydraulic cylinder seals.
4. Avoid using hydraulic cylinders under excessive pressure or load to avoid damage to the seals.
5. Regularly check the liquid level and pressure of the hydraulic cylinder to ensure its normal operation and avoid damage to the sealing components due to hydraulic cylinder failures.
6. When the hydraulic cylinder is stopped for a long time, regular maintenance should be carried out, such as applying anti rust oil, to prevent aging or deformation of the sealing components.
For Sumitomo Cylinder Seal Kit, For Sumitomo Center Joint Seal Kit, Sumitomo Center Joint Seal Kit, Sumitomo Bucket Cylinder Seal Kit
Safe Seal Technology Co., Ltd. , https://www.sprsealkits.com