Precautions that are often encountered in three roller gates

Precautions for every three roller brakes

1. During the card reading period, the user is strictly prohibited from squeezing, leaning, and propelling the brake lever before the pass indicator light turns into the green light, so as to suppress the normal operation of the equipment.

2. When the equipment is not applied, it is strictly forbidden to sit or lean on the brake lever to suppress unnecessary damage to the gate.

3. Do not apply the equipment directly to the exposed or wet or erroneous shape to suppress the application life of the equipment due to rain, moisture or mistakes. When the equipment is used in the household, it should be equipped with sun awnings and other rain-proof equipment.

4. When passing through, the user only needs to quietly push the brake lever, and do not push the brake lever strongly in the process of passing.

5. When the three-roller brake is powered off, the person must not be under the brake lever to suppress the injured person.

6. Do not apply this unit when there is lightning, in case of damage to the gate.

7, should ensure that the finely smashed back to the sturdy connection, in order to prevent the birth of the carcass and other intentional shape of the outbreak.

8. The shell of the equipment is 304# stainless steel. It is necessary to scrub the midpoint with a soft fabric. For clean and bright light, do not scrub the midpoint with tough materials to suppress the impact of scratching. At the same time, it should be suppressed by water to suppress electricity. Control the shredded short circuit and destroy the device.

9. Regularly check the shape of the various moving parts of the equipment. If loose fasteners such as nuts and screws are found, they should be tightened in time to suppress the shortcomings of the gates caused by long-term operation.

10. Regularly check the shape of the finely wounded back to ensure that it is firmly connected.

11. Regularly check the connectors and wiring points of the roads to ensure that the stretch is strong.

12. In the process of applying the three-roll gate, the gates should be respected, and the violent conflicts should be suppressed. It is strictly forbidden to rely on and prohibit the knocking. Respect the gates, do the same general maintenance and care incidents, practically eliminate the shortcomings of the brakes and repair costs.