Refrigerator Cabinet Inner Liner Vacuum Forming Mold

Product Summary & Main Parameters:

This kind of Refrigerator Inner Liner Forming Mold is used on Double-Station Vacuum Forming Machine, its main body is made by ZL401 Cast Copper Pipe, which has water heat function, the inner copper pipe has much higher cleanness, stronger prevention of dust, the reasonable layout of water pipe, etc.

The absorption mold includes main body, the bottom of mold, absorption device controller display, hydrodynamic hubs and so on.

General Technical Parameters (Just for Reference. All data can be adjusted by requests from consumers if needs):
Applicable Equipment: BC90 Cabinet Inner Liner Forming Machine
Main Material: ZL401 Cast Copper Pipe
Other data: Surface Polishing, Roughness≤0.4. 

Galvanized Coil/Sheet

Galvanized Sheet/ Galvanised steel/ Hot Dip Galvanized Steel/ Galvanised steel

Grade	DX51D,SGCC,DX52D,ASTMA653,JISG3302
Thickness	0.13-4.0mm
Width	600-1500 mm
Zinc Coating	40-275g/m2
Surface Treatment	light Oil,Unoil,dry,chromate passivated,non-chromate passivated
Spangle	regular spangle,minimal spangle, zero spangle,big spangle
Coil Weight	2-5 tons
Coil ID	508/610 mm

Galvanized Coil,Galvanized Steel Coil,Hot Dipped Galvanized Rolled Coil,Hot Dipped Galvanized Steel Coils

GNEE (Tianjin) Multinational Trade Co.,Ltd , https://www.suppliersteel.com