Remind the owner of the wrong method to avoid in car care

Now that there are more and more private car owners, we all hope that our car will be open for a long time and reduce the cost of maintenance. The relevant person reminds the owner of car care to avoid the following erroneous methods.

The tank "opens the pan" and adds water. During the hot summer months, when some drivers saw the phenomenon of “cooking” in the water tank, they feared that the temperature of the engine would rise again and they would immediately turn off the fire and add water. This practice is wrong and it is very likely that the cylinder head will crack due to sudden cold. If you meet the tank "open pot", the correct way is: immediately stop, let the engine keep idle idle to continue cooling; at the same time open the hood, increase the cooling rate. After the temperature of the cooling water is lowered, the engine is turned off. If the amount of cooling water is insufficient at this time, it should be added slowly to prevent the cylinder head from cracking due to sudden cooling.

Bolt too tight. There are many fasteners on the car that are connected with bolts and nuts, and it should be ensured that they have sufficient preload, but they cannot be tightened too tightly. If the tightening is too tight, on the one hand, the connecting member will be permanently deformed under the action of the external force; on the other hand, the bolt will be permanently deformed in tension, the pre-tightening force will be reduced, and even a sliding buckle or a broken phenomenon will occur.

2 ton sitting on electric reach truck

Zowell FRB20 model sitting on Electric Reach Truck is standard with side shift function. It is an industrial material handling equipment, which refers to the forward moving wheel type vehicle which carries out loading and unloading, stacking and short distance transportation of the good by pallets.

There are also many options like camera and monitor, EPS function, AGV modification, height preselection function etc. The sitting on electric reach truck is a high performance truck with perfect performance and excellent safety.

What's more, it is equipped with intelligent system, American Curtis controller system, double AC system ensure its flexible operation in the big warehouse.

Detail features

1. Wider area for the leg
The legroom of the operating position is ample, allowing the operator to move flexibly. They will feel comfortable without worrying about being cramped.

2. Sitting type operation
The seat is adjustable. The soft seat can relieve fatigue and provide a safe and comfortable driving experience for operators.

3. Design of low center of gravity
The design of low center of gravity can ensure stability of the truck so that it is anti-overturning even in complex working conditions.

4. height-limited lifting

5. Turning speed limiting device
The precise high speed limiting turning control technology can prevent side overturning, thus protecting the goods from dropping.

6. Good lifting ability
The max lifting height is 9000mm which can meet the requirements of goods stacking in certain height.

7. Front moving function
The fork can move forward for 590cm,which can reduce turning radius of the truck as well as ensure running stability.

8. Small turning radius

This reach truck has a small turning radius which is only 1700mm. It can move flexibly even in very tight warehouse and workshop areas.

9. Tilt forward and backward

The fork can tilt forward and backward for easy loading and unloading of goods and material, thus improving the transporting stability of the reach truck.

10. Forged fork
The width of the fork can be adjusted within the range of 200-760mm. It is suitable for working conditions with both single side pallets and double side pallets.

Reach Truck,Reach Truck Forklift,Electric sitting on Forklift,Hyster reach truck

Suzhou Pioneer Material Handling Equipment & Technology Co., Ltd , https://www.xianfengforklifts.com