Rubber cable cable structure requirements

What requirements must be met for the rubber cores placed in the rubber sheath cables, I believe we must all understand them. At the same time, we must also understand what requirements should be met for the cable structure of mine rubber sheath cables so as to deepen the Mine rubber sheath cable understanding and understanding. So here we come to explain it to everyone:
1, to use a smaller pitch multiplier to improve the flexibility of the cable.
2, In order to ensure the mechanical strength of the ground core, the cross section of the ground core is larger than that of the general cable. For small cross-section products, the same cross section as the main line pipe is adopted.
3, The control wire cores are individually twisted into groups and then cabled together with the main wire cores.
4, requires sufficient mechanical strength, good wear resistance. Underground cables require flame retardance. Therefore, neoprene is used and the gel content is not less than 50%.
5, 6KV mobile rubber sheathed cable requires sufficient electrical insulation to improve the corona cracking resistance of the sheath.

Special Pump For Starch

ID starch pump is a horizontal, single-stage, cantilever Centrifugal Pump. Its rated performance characteristics and installation dimensions conform to the standard ISO2858, and its manufacturing technical conditions conform to ISO5199. This series of pumps absorbs the advantages of KSB pumps and WARMAN pumps. The improvement of the pump makes the solid content of the conveyed liquid up to about 50%. It is specially designed for the transportation of special media with high solid content, precipitation and easy crystallization, and fiber in the starch, sugar, food, pharmaceutical, chemical and other industries. Put an end to "running", "running", "leakage", "blocking" and other phenomena, China Starch Association "starch equipment localized first-class product".

The impeller design of the ID series pump is based on the solid content of the conveying slurry, whether it is crystallized and glued, the size of the solid particle size, and the length of the suspended fibers. The impeller can be designed to be closed and the flow channel is widened on the premise of not affecting the rated performance. , semi-open, open, swirling, etc., the seal can be designed as single-end or double-end mechanical seal, with impeller plus packing seal, plus impeller plus skeleton oil seal, etc.

Special Pump For Starch,Food Pump,Screw Pump,Food Transfer Pump

Jiangsu Qiantu Trading Co., Ltd. , https://www.qiantupump.com