Scenic Three Roller Gate

1.1 Brief

Welcome to use our company's access gate system. I hope this manual will bring you convenience when installing the machine. Three-roller brake is an intelligent channel management device developed, developed and produced by our company. By configuring different read-write devices, the intelligent control and management of channel access can be completed.

The shape of the whole product is stamped and formed with stainless steel plate, which is beautiful and elegant, rust-proof and durable, and the system uses a standard electrical interface to the outside. It can easily integrate barcode readers, ID cards, IC cards and other reading and writing equipment on this device, so that The entry and exit personnel provide an orderly and civilized way of passing, and can prevent illegal personnel from entering and exiting. At the same time, in order to meet the requirements of the fire exit, in the event of an emergency, the power is cut off, the staff is evacuated.

1.2 Main functions and features of the system

The electromagnet is used to lock the positioning arm, which makes the brake lock and unlock more accurate and reliable.

The entire system runs smoothly with low noise and no mechanical shock.

With incoming call self-test function, it automatically recovers in locked state.

It has a variety of working modes to choose from, which can read the card in both directions. It can also read the card while the other direction is forbidden, while reading the card and the other direction is free.

It has the functions of power down and power down, and manual power up.

It has a unified and standard external electrical interface, which can be connected with various read-write devices, which is convenient for system integration, and can be remotely controlled and managed by a management computer.

It can automatically count the number of people in the direction of traffic, and present it to the manager in an intuitive LED (optional) manner, so that the manager knows the number of people in a certain direction.

It has a clear direction indication function, with intuitive LED passers to indicate whether to pass or not.

It has a memory card reading function and no memory function, and the user can set it through the motherboard keyboard according to his own needs.

With automatic reset function. When the passer does not pass within the prescribed time after reading the card, the system will automatically cancel the passer's current access permission, and the restricted travel time can be set by the management staff themselves.

1.3 Main technical parameters

1) Power supply voltage: AC220V ± 10V, 50Hz

2) Working environment temperature: -15 ℃ ～ 60 ℃

3) Relative humidity: less than 95%, non-condensing

4) The maximum channel width is 600mm

5) Passing speed: 40 people / minute

6) Working mode: 24V / 30W DC solenoid

7) Input interface: dry contact signal or 12V level signal

2 Appearance of equipment

2.1 Equipment dimensions and shape

The types and specifications of the three-roller gate, the conventional appearance of the chassis can be divided into: bridge-type three-roller gate and vertical three-roller gate. The length, width and height of the three-roller gate can be customized according to customer needs. Common appearance and size are shown in the figure below

Bridge type oblique three-roller gate Vertical three-roller 1200 * 280 * 1000mm 420 * 330 * 980mm

3. Three-roller brake mechanism and its working principle

3.1 Three roller brake mechanical system

The three-roller brake mechanical system is divided into a structural frame and a movement. The structure frame serves as a carrier, and an electric control device and a movement are installed on the movement. Pole, etc.

3. 2 Three Roller Gate Electric Control System

The electronic control system consists of a main control board, a limiter, a direction indicator board, a transformer, an electromagnet, a card reader, and an access control board.

1. Main control board: The control center of the system. It receives the signals from the card reader and the limiter, judges and processes these signals logically, and then issues execution commands to the direction indicator, electromagnet, and counter.

2. Limiter: lock the gate after turning 60 degrees;

3. Direction indicator: display the current traffic sign status of the passage, and guide pedestrians to pass through the passage safely and orderly;

4. Left and right frame electromagnets: The main control board controls the electromagnet to unlock and lock after receiving the signal.

5. The middle sucker electromagnet: control the rod drop after power off