Model NO.: TDT90-32/1422X12200
HS Code: 8462911000
Model NO.: TDT90-32/1422X12200
HS Code: 8462911000
Steel Pipe Mechanical Expandermodel:TDT90-32/1422X12200Technical performance
- :Applicable scope of the machine
- Dia,:   Φ508~Φ1422mm
- Length: 8000~12200 mm
- Material:X70   8~32mm  Â
 Main technical parameter
1.Expander rate:0.8%~1.5% Â Â Â Range 0.8%-1.5%1%~1.12% The best range 1%-1.12%2. Precision range of pipe after expand expanding
- :Φ610(Φ610)±0.5mm
- Dia.( below Φ610 )tolerance:±0.5mm
- Φ610±1.6mm
- Dia. (Above Φ610 ) :  or ±1.6mm
- :≤0.2%                     Â
- Straightness: ≤0.2
- Producing efficiency:(Average)  8 pieces /hr.
  Main parameters of driving oil-cylinder
- : Mounting: Horizontal style
- :16000KN Â Â Â Â Nominal pulling-force:16000KN)
- :25MPa        Rated working pressure: 25MPa
- : 15~18s/ Â Â Â Expanding speed: 15~18 n/s
- :950 mm  Diameter of big cylinder: about 950mm
 Main parameter of draw bar
- :3(:40CrNiMoA) Quantity: 3 sets (Material: 40CrNiMoA)
- :Φ440×11235mm  210×15180mm
- 1st specification::sleeveΦ440×11235mm  draw bar 210×15180 mm
- :Φ560×11235mm  300×15865 mm
- 2nd specification: sleeveΦ560×11235mm  draw bar 300×15865 mm
- :Φ690×11235mm  360×15865 mm
- 3rd specification: sleeveΦ690×11235mm  draw bar 360×15865 mm
 Main parameter of expanding headÂ
- Amounting quantity: each draw bar has 1 expanding head, 3 sets in total (Specific amounting as per end users
- 1# Expanding head is equipped on 1# horn drawbar:
- Applicable specification of head: Φ508~Φ610mm
- 2#Â expanding head is equipped on 2# horn drawbar
- Applicable specification of head: Φ660~Φ762mm
expanding heads are equipped on 3# horn drawbar.
- 3#:Φ813~Φ914.4mm
- Applicable pipe specification of 3#expanding head: Φ813~Φ914.4mm
- 4#:Φ965.2~Φ1168mm
- Applicable pipe specification of 4#expanding head: Φ965.2~Φ1168mm
- 5#:Φ1219~Φ1422.4mm
- Applicable pipe specification of 5#expanding head: Φ1219~Φ1422.4mm
Steel Pipe Mechanical Expandermodel:TDT90-32/1422X12200Technical performance
- :Applicable scope of the machine
- Dia,:   Φ508~Φ1422mm
- Length: 8000~12200 mm
- Material:X70   8~32mm  Â
 Main technical parameter
1.Expander rate:0.8%~1.5% Â Â Â Range 0.8%-1.5%1%~1.12% The best range 1%-1.12%2. Precision range of pipe after expand expanding
- :Φ610(Φ610)±0.5mm
- Dia.( below Φ610 )tolerance:±0.5mm
- Φ610±1.6mm
- Dia. (Above Φ610 ) :  or ±1.6mm
- :≤0.2%                     Â
- Straightness: ≤0.2
- Producing efficiency:(Average)  8 pieces /hr.
  Main parameters of driving oil-cylinder
- : Mounting: Horizontal style
- :16000KN Â Â Â Â Nominal pulling-force:16000KN)
- :25MPa        Rated working pressure: 25MPa
- : 15~18s/ Â Â Â Expanding speed: 15~18 n/s
- :950 mm  Diameter of big cylinder: about 950mm
 Main parameter of draw bar
- :3(:40CrNiMoA) Quantity: 3 sets (Material: 40CrNiMoA)
- :Φ440×11235mm  210×15180mm
- 1st specification::sleeveΦ440×11235mm  draw bar 210×15180 mm
- :Φ560×11235mm  300×15865 mm
- 2nd specification: sleeveΦ560×11235mm  draw bar 300×15865 mm
- :Φ690×11235mm  360×15865 mm
- 3rd specification: sleeveΦ690×11235mm  draw bar 360×15865 mm
 Main parameter of expanding headÂ
- Amounting quantity: each draw bar has 1 expanding head, 3 sets in total (Specific amounting as per end users
- 1# Expanding head is equipped on 1# horn drawbar:
- Applicable specification of head: Φ508~Φ610mm
- 2#Â expanding head is equipped on 2# horn drawbar
- Applicable specification of head: Φ660~Φ762mm
expanding heads are equipped on 3# horn drawbar.
- 3#:Φ813~Φ914.4mm
- Applicable pipe specification of 3#expanding head: Φ813~Φ914.4mm
- 4#:Φ965.2~Φ1168mm
- Applicable pipe specification of 4#expanding head: Φ965.2~Φ1168mm
- 5#:Φ1219~Φ1422.4mm
- Applicable pipe specification of 5#expanding head: Φ1219~Φ1422.4mm
Pressure Vessel
Pressure vessels, sometimes storage tanks, are containers designed to hold liquids or gases at a pressure that differ from the ambient pressure. They are used in a variety of applications, including chemical processing, oil and gas processing, power generation, and medical applications. Pressure vessels can be made from a variety of materials, including stainless steel, carbon steel.
The design of pressure vessels must consider the pressure and temperature of the fluids, as well as other factors such as corrosion, fatigue, and creep to determine the wall thickness. Pressure vessels must be designed and manufactured in accordance with applicable codes and standards, such as GB Standard or ASME Standard.
Types of pressure vessel equipment includes Shell And Tube Heat Exchanger, Shell and Plate Heat Exchanger, container type pressure vessel, reactor, separator, and so on.
Pressure Vessel,Thin Pressure Vessel,Unfired Pressure Vessel,Thin Walled Spherical Pressure Vessel
Guangdong Jiema Energy Saving Technology Co.,Ltd , https://www.heatexchangerjiema.com