1. The vortex flowmeter pipeline adopts vibration reduction measures.
The sensor should be avoided as far as possible on the pipe with strong vibration, especially lateral vibration. If it is necessary to install, vibration damping measures must be taken. Pipe fastening devices are installed at the upstream and downstream 2D ​​of the sensor, and anti-vibration pads are added.
2. The vortex flowmeter reasonably selects the installation site and environment.
Avoid strong power equipment, high-frequency equipment, strong power switch equipment; avoid the influence of high-temperature heat source and radiation source, avoid strong vibration places and strong corrosive environment, and consider installation and maintenance.
3. The vortex flowmeter is installed on the horizontal pipe, which is the common installation method of the flow sensor.
When measuring the gas flow rate, if the measured gas contains a small amount of liquid, the sensor should be installed at a higher point in the pipeline.
4. The vortex flowmeter sensor is mounted on the side of the horizontal pipe.
Regardless of the fluid being measured, the sensor can be mounted sideways on a horizontal pipe, especially for superheated steam, saturated steam and cryogenic liquids. If conditions permit side-loading, the temperature of the fluid has less effect on the amplifier.
5. Installation of the vortex flowmeter sensor in the vertical pipe.
When measuring gas flow, the sensor can be mounted on a vertical pipe with unlimited flow. If the gas to be measured contains a small amount of liquid, the gas flow should be from bottom to top.
When measuring the flow of liquid, the flow direction of the liquid should be from bottom to top: this does not add extra weight to the probe.
So what is laser engraving? The term [laser" is an acronym for Light Amplification by Stimulated Emission of Radiation. Basically a beam of light is reflected through a series of mirrors, that points the beam downward through a focus lens which is designed to concentrate the light into heat at an exact point. That point where the laser touches the surface is called the [focal point" and is where the heat is most intense. This focal point is less than a millimeter in size, however the diffraction of heat upon contact with the surface usually equates to roughly 1/200" in actual cutting accuracy. We produce cnc router machines for many years. How does laser engraving drifter from traditional printing? When you print something traditionally you add ink to paper. This is the opposite. We use the laser to remove material and what is normally [printed" will be cut away from your card with visible depth and texture. By varying the intensity of the beam, we can engrave at different depths, or even cut all the way through the material for a unique edge or die cut look. Another great thing about this process is that it does not involve any bits, blades, ink, or other components that need to be replaced, which allows us to ensure that each and every card is consistent in it`s look and end quality. We also offer full color UV printing which can also be done with laser engraving for a unique pairing.
Laser Engraver,Cnc Laser Engraver,Laser Cutter Engraver,Metal Laser Engraver,laser engraving machine,cnc laser machine
JINAN XUANLIN MACHINERY CO., LTD. , https://www.cncfiberlasers.com