3′&4′ Outlet QDX QX Electric Submersible pump with High Quality
- Model NO.: QDX series
- Max.Capacity: >400 L/min
- Material: Aluminum
- Assembly: impeller
- Start Up: Electric Pump
- Application: Submersible Pump
- Media: Clean Water
- Theory: Centrifugal Pump
- Transport Package: Colour Carton
- Origin: Zhejiang, China
- Max.Head: <10m
- Driving Type: Motor
- Structure: Single-stage Pump
- Power: Electric
- Type: Submersible Pump
- Industry: Agriculture, Household, Industry
- Performance: Submersible Pump
- Trademark: Kaili
- Specification: QDX Series
- HS Code: 8413709190
  Pump Introduction
   QDX, QX series submersible pump consists of pump, mechanical seal and motor. Pump is at the bottom part of pump, which is adopted centrifugal impeller. Motor which is single-phase or three-phase is at the upper part of pump. Seal is used where pump and motor combine, which is a kind of double-end mechanical seal, O rings are applied to all static joints. Float switch can be equipped to control pump's starting and stopping automatically according to the water level.
Main Application
  This series pump is small and light, which is widely used in countryside for elevating water from well, irrigation, sprinkling and domestic water supply, and also used in draining off water for fishpond and building site.
Work conditions
The pump can work properly and continuously under following operational conditions:
1. Medium is not corrosive,Sand contents should be max. 0.01% by volume and Â
   granular size should be max. 0.2mm.
2. Medium temperature shouldn't be over 40°C and PH should be 6.5-8.5.
3. The pumps should be operated within rated head.
4. The pumps should be fully submerged into water with depth of less than 3m      mad max. the pump should be min. 0.5m over the water bottom and not be insert into sludge.
5.Power frequency should be 50HZ,single phase voltage 220V,three phase voltage 380V,and voltage fluctuation should be 0.9-1.1 times than the rated.
Workplace Show
Features of Kaili Submersible Pump
1. 100% copper wire
2. Chrome-plated pump rotor (more resistant to wear and corrode)
3. Thermal protector
4. High-end bearing and mechanical seal
Material
|
Structure of pump |
Material | Can be selected |
| Pump body | Aluminum | Cast-Iron / Stainless steel |
| Impeller | Aluminum | Stainless steel |
| Pump shaft | 45 # Steel | Stainless steel |
| Cable | / | Arbitrary length |
Specification
| Appellation | Model | Flow | Head (m) |
Power (kW) |
HP | Pipe size | Voltage (v) |
Velocity (r/min) |
||
| m³/h | l/min | (mm) | (inch) | |||||||
| QDX Single-phase Submersible Pump |
QDX 1.5-16-0.37 | 1.5 | 25 | 16 | 0.37 | 0.5 | 25 | 1 | 220 | 2860 |
| QDX 3-20-0.55 | 3 | 50 | 20 | 0.55 | 0.75 | 25 | 1 | |||
| QDX 10-10-0.55 | 10 | 166.7 | 10 | 0.55 | 0.75 | 40 | 1.5 | |||
| QDX 15-7-0.55 | 15 | 250 | 7 | 0.55 | 0.75 | 50 | 2 | |||
| QDX 1.5-32-0.75 | 1.5 | 25 | 32 | 0.75 | 1 | 25 | 1 | |||
| QDX 7-18-0.75 | 7 | 117 | 18 | 0.75 | 1 | 40 | 1.5 | |||
| QDX 10-16-0.75 | 10 | 166.7 | 16 | 0.75 | 1 | 50 | 2 | |||
| QDX 15-10-0.75 | 15 | 250 | 10 | 0.75 | 1 | 65 | 2.5 | |||
| QDX 10-16-0.8 | 10 | 166.7 | 16 | 0.8 | 1.1 | 25/40/50 | 1/1.5/2 | |||
| QDX 1.5-38-1.1 | 1.5 | 25 | 38 | 1.1 | 1.5 | 25 | 1 | |||
| QDX 10-20-1.1 | 10 | 166.7 | 20 | 1.1 | 1.5 | 50 | 2 | |||
| QDX 15-15-1.1 | 15 | 250 | 15 | 1.1 | 1.5 | 65 | 2.5 | |||
| QDX 30-9-1.1 | 30 | 500 | 9 | 1.1 | 1.5 | 80 | 3 | |||
| QDX 15-18-1.5 | 15 | 250 | 18 | 1.5 | 2 | 65 | 2.5 | |||
| QDX 40-9-1.5 | 40 | 667 | 9 | 1.5 | 2 | 80 | 3 | |||
| QDX 65-7-2.2 | 65 | 1083 | 7 | 2.2 | 3 | 100 | 4 | |||
| QX Three-phase Submersible Pump |
QX 3-20-0.55 | 3 | 50 | 20 | 0.55 | 0.75 | 25 | 1 | 380 | 3000 |
| QX 10-10-0.55 | 10 | 166.7 | 10 | 0.55 | 0.75 | 40 | 1.5 | |||
| QX 15-7-0.55 | 15 | 250 | 7 | 0.55 | 0.75 | 50 | 2 | |||
| QX 1.5-32-0.75 | 1.5 | 25 | 32 | 0.75 | 1 | 25 | 1 | |||
| QX 7-18-0.75 | 7 | 117 | 18 | 0.75 | 1 | 40 | 1.5 | |||
| QX 10-16-0.75 | 10 | 166.7 | 16 | 0.75 | 1 | 50 | 2 | |||
| QX 15-10-0.75 | 15 | 250 | 10 | 0.75 | 1 | 65 | 2.5 | |||
| QX 10-20-1.1 | 10 | 166.7 | 20 | 1.1 | 1.5 | 50 | 2 | |||
| QX 15-15-1.1 | 15 | 250 | 15 | 1.1 | 1.5 | 65 | 2.5 | |||
| QX 30-9-1.1 | 30 | 500 | 9 | 1.1 | 1.5 | 80 | 3 | |||
| QX 15-18-1.5 | 15 | 250 | 18 | 1.5 | 2 | 65 | 2.5 | |||
| QX 40-9-1.5 | 40 | 667 | 9 | 1.5 | 2 | 80 | 3 | |||
| QX 65-7-2.2 | 65 | 1083 | 7 | 2.2 | 3 | 100 | 4 | |||
| Sewage Submersible Pump |
QDX 6-12-0.4 | 6 | 100 | 12 | 0.4 | 0.55 | 25/32 | 1/1.5 | 220 | 2860 |
| QDX 10-15-0.75 | 10 | 166.7 | 15 | 0.75 | 1 | 25/40 | 1.5/2 | |||
| QDX 10-18-1.1 | 10 | 166.7 | 18 | 1.1 | 1.5 | 25/40 | 1.5/2 | |||
| QX 10-18-1.1 | 10 | 166.7 | 18 | 1.1 | 1.5 | 25/40 | 1.5/2 | 380 | 3000 | |
| QDX Cast-iron body Submersible Pump |
QDX 3-14-0.37T | 3 | 50 | 14 | 0.37 | 0.5 | 25 | 1 | 220 | 2860 |
| QDX 3-18-0.55T | 3 | 50 | 18 | 0.55 | 0.75 | 25 | 1 | |||
| QDX 3-24-0.75T | 3 | 50 | 24 | 0.75 | 1 | 25 | 1 | |||
| QDX 3-30-1.1T | 3 | 50 | 30 | 1.1 | 1.5 | 25 | 1 | |||
| QDX 6-32/2-1.5T | 6 | 100 | 32 | 1.5 | 2 | 40 | 1.5 | |||
Spherical Plain Bearing,Spherical Roller Bearing,SKF Spherical Roller Bearing
Thrust Ball bearing Co., Ltd. , http://www.cnrollerbearing.com