Bimetallic Injection Screw Barrel Injection Molding Screw for Plastic Machine

  • Model NO.: Injection screw barrel
  • Structure: Vertical and Horizontal Composite
  • Automation: Automatic
  • Trademark: ZHONGYANG
  • Origin: China(Mainland)
  • Type: Injection Blow Molding
  • Plastic Type: Thermoplastic
  • Computerized: Computerized
  • Specification: ISO 9001: 2008 approved
  • HS Code: 84779000
Bimetallic Injection Screw Barrel injection molding screw barrel
Specification:
Screw diameter: Ø 20mm-Ø 220mm
Mould clamping force: 250T-3200T
Shot weight: 30G-30000G

Technical Information
Base Materials:
(1)38CrMoAlA(JIS SACM645)
(2)42CrMo(AISI 4140)
(3)4Cr5MoSi V1 (JIS SKD-61)
(4)9Cr18MOV
(5)HPT

Bimetallic alloy materials:
1)Fe-based alloy
2)Ni-based alloy/Deloro alloy
3)Co-based alloy
4)NiCo-based alloy
5)Tungsten carbide/Wolfram carbide

Technics:
Heat treatment
High-frequency quenching
Nitriding treatment
Hard-chrome electroplating
Bimetallic alloy welding
Bimetallic alloy centrifugal casting

Technical parameter:
Nitrided layer depth: 0.5-0.8mm
Nitrided hardness: 900-1000HV
Nitrided brittleness: Less than grade 1
Surface roughness: Ra0.4
Linearity of screw: 0.015mm
Hard-chrome plating hardness after nitriding: ≥ 950HV
Chrome-plating layer depth: 0.025-0.085mm
Bimetallic layer depth: 3mm

Experienced manufacturer, Focus on quality and service.


Main Base materials 
  		 1.38CrMoAlA  (Nitriding Steel) 
2.  SKD-61   (Special Tool Steel) 
3.  42CrMo (Ultrahigh Strength   Steel) 
4. DC53 ( Cold Work   Die Steel)   
5. W6Mo5Cr4V2 ( High-Speed   Tool   Steel ) 
6. HPT 
  
  
  
Main Alloy Materials 		 1.  Ni-based alloy/Deloro alloy 
2.  Tungsten carbide/Wolfram carbide 
3.  NiCo-based alloy 
4.  Fe-based alloy 
5.  Co-based alloy   
  
  
  
  
Processing Technics 		 1.  Heat treatment 
2.  Quenching 
3.  Nitriding treatment 
4.  Bimetallic alloy welding 
5.  Bimetallic alloy centrifugal casting 
6.  Hard-chrome electroplating 
  
  
  
  
  
Technical parameters 		 Nitriding layer depth  0.5-0.8mm 
Nitrided hardness  HRC56-58 
Nitrided brittleness  Less than grade 1 
Surface roughness  Ra 0.4 
Linearity of screw  0.015mm 
Hard-chrome plating hardness  ≥HRC57 
Chrome-plating layer depth  0.03-0.09mm 
Bimetallic layer depth  3 mm 
Bimetallic layer hardness  HRC58-62 
Above are main technical information, a suitable screw and barrel will be made according to your requirement. 
 

Custom Keychains

ZHONGSHAN LAVI HARDWARE PRODUCTS CO., LIMITED , https://www.lavihareware.com