Inverter AC/DC TIG Welding Equipment Pulse TIG-315p with Pulse Function
*Adopting PWM control technology,constant current,accurate current control.
*High frequency arc starting,no matter the current is high or low,the arc starting rate high.
*DC AC tig aluminium welding machine steady welding current,esthetic shaping of welding seam.
*Adjustable pulse current and pulse frequency, apply to many kinds of welding technology.
*ACDC tig welder one machine serves several purposes,saving the welding cost.
*The machine can automatic welding,Optional cycling water tank.
*Can be used to weld aluminium, stainless steel,carbon steel,alloyed steel,copper,titanium etc.Â
| Model: | AC DC TIG-315Â |
| Input power Voltage Frequency(V,Hz): | AC380(three phase)±15%,50/60 |
| Rated input power capacity(KVA): | 8.9 |
| No-load voltage(V): | 45 |
| Output current range.(A):  | 20-315 |
| Rated output voltage(V): | 22.6 |
| Duty cycle (%)(25ºC): | 60 |
| No-load loss(W): | 40 |
| Arc-starting: | HF |
| Efficiency(%):Â | 85 |
| Power factor (COSφ): | 0.93 |
| Insulation class: | F |
| Weight(KG): | 34 |
| Overall dimension(mm): | 560×364×430 |
| Case protection degree: | IP21S |
| Pre-flow time(s): | 0-2 |
| Duty ratio(%):  | 20-8 |
| Current down-slope time(s): | 0-5 |
| Post-flow time(s): | 2-10 |
| Remote interface: | with |
| AC welding thickness(mm):     | 0.8-10 |
 AC/DC TIG welding equipment product Characteristics:
*Adopting PWM control technology,constant current,accurate current control.
*High frequency arc starting,no matter the current is high or low,the arc starting rate high.
*DC AC tig aluminium welding machine steady welding current,esthetic shaping of welding seam.
*Adjustable pulse current and pulse frequency, apply to many kinds of welding technology.
*ACDC tig welder one machine serves several purposes,saving the welding cost.
*The machine can automatic welding,Optional cycling water tank.
*Can be used to weld aluminium, stainless steel,carbon steel,alloyed steel,copper,titanium etc.Â
| Model: | AC DC TIG-315Â |
| Input power Voltage Frequency(V,Hz): | AC380(three phase)±15%,50/60 |
| Rated input power capacity(KVA): | 8.9 |
| No-load voltage(V): | 45 |
| Output current range.(A):  | 20-315 |
| Rated output voltage(V): | 22.6 |
| Duty cycle (%)(25ºC): | 60 |
| No-load loss(W): | 40 |
| Arc-starting: | HF |
| Efficiency(%):Â | 85 |
| Power factor (COSφ): | 0.93 |
| Insulation class: | F |
| Weight(KG): | 34 |
| Overall dimension(mm): | 560×364×430 |
| Case protection degree: | IP21S |
| Pre-flow time(s): | 0-2 |
| Duty ratio(%):  | 20-8 |
| Current down-slope time(s): | 0-5 |
| Post-flow time(s): | 2-10 |
| Remote interface: | with |
| AC welding thickness(mm):     | 0.8-10 |
Â
Aluminium chloride (AlCl3), also known as aluminium trichloride, is the main compound of aluminium and chlorine. The solid has a low melting and boiling point. It is mainly produced and consumed in the production of aluminium metal, but large amounts are also used in other areas of the chemical industry. The compound is often cited as a Lewis ACID.
Aluminum chloride, solution appears as a straw-colored liquid. Denser than water. Contact may cause severe irritation to skin, eyes, and mucous membranes. May be toxic by ingestion.
Aluminum chloride, anhydrous appears as a white to gray powder with a pungent odor. Corrosive to tissue and toxic by ingestion.
Aluminium Chloride Anhydrous,Aluminium Chloride Anhydrous 99%,aluminium trichloride
HENAN JINHE INDUSTRY CO.,LTD , https://www.hnchromiumoxidegreen.com