NPT/Basp/RC/G Threaded Ss Pneumatic Angle Seat Valve with Screwed End and Plastic Cap Pistion

  • Model NO.: 1/4"~4"(DN10-DN100)
  • Media: Gas, Oil, Water, Acid
  • Connection Mode: Thread
  • Material: Stainless Steel Body/ABS Cap
  • Working Pressure: 0.1-1.6MPa
  • Port Size: Dn10,15,20,25,32,40,50,65,80,100
  • Acting: Double Acting,Normally Open/Cloase(No/Nc)
  • Manual Overrides: with Manual Overrides Device(Optional)
  • Trademark: neutral brand or customizable
  • Specification: 1/2"~4"(DN15~DN100)
  • HS Code: 8481202000
  • Certification: GS, RoHS, CE, ISO9001
  • Standard: Standard
  • Power: Pneumatic
  • Type: Single Seater
  • Air Control Supply Pressure: 0.3--0.8MPa
  • Actuator Cylinder Size: 27/40/50/63/90/90al/125al
  • Actuator Material: Stainless Steel or ABS Plastic
  • Optional Accessories: Ep-Positioner,Solenoid Valve,Limit Switch
  • Transport Package: Packing with Plywood Case
  • Origin: China
NPT/BASP/RC/G threaded SS pneumatic angle seat valve with screwed end and plastic cap pistion
Design feature:
Stainless steel or gunmetal housing with sleeve, clamped or welded connection
High flow rate
Over 3 years long service life, 3 million cycles loaded test.
Trusted inner parts for long cycle life
Large accessory program with stroke limitation and feedback
Robust actuators with modular accessory program
Investment casting

SPECS.
Size: 1/4"~4"(DN10-DN100)
P/N: 1.6MPa
Meium: neutral-water/oil/gas,steam,organic solvent,weak acid,weak alkaline
Fluid temp. : -50ºC--230ºC
Ambient temp: -10ºC--80ºC
Operation: pneumatic
Control medium: neutral air
Air control supply pressure: 0.3--0.8MPa

Material:
Body: ASTM-A351 CF8/CF8M
Seat: PTFE
Stem: ANSI-304/ANSI-316
Seal: NBR,Viton,Fluororubber
Cap: PA6,ABS,stainless steel ASTM-A351 CF8/CF8M
Thread: BSP;BSPT;NPT;DIN;JIS;G;RC
Connection: threaded,flange,butt weld/socket weld/clamp(fast-installation)

Operation
angle seat piston valve is a pneumatically-controlled valve with a piston actuator providing linear actuation to lift a seal off its seat. The seat is set at an angle to provide the maximum possible flow when unseated. Angle seat piston valves are particularly suited to applications where high temperatures and large flowrates are required, such as steam or water. When used in reverse some models of angle seat piston valve will eliminate water hammer when operated.

Why choose us ?
We not only deisgn and manufacture valves, but also handling in valve mould tooling,design&development around Wenzhou.

*More complete drawing and technical specs pls contact us.
NPT/Basp/RC/G Threaded Ss Pneumatic Angle Seat Valve with Screwed End and Plastic Cap Pistion
NPT/Basp/RC/G Threaded Ss Pneumatic Angle Seat Valve with Screwed End and Plastic Cap Pistion
NPT/Basp/RC/G Threaded Ss Pneumatic Angle Seat Valve with Screwed End and Plastic Cap Pistion


 

The fine process of the hydraulic cylinder and pneumatic cylinder is called honing or cutting process.  No matter which process technology the company takes on the inner hole of the steel pipe, it can put into the inner hole of the made-up articles with the piston, gasket and flange, fitting grease outside the pipe to form a hydraulic cylinder. People in this field often called honing or cutting pipes the hydraulic steel cylinder.


Inner hole machining process: flat head, chamfering, rough boring, boring, boring, honing or rolling, pipe inner hole straightness of this process can reach 0.2 mm/m or less, basic can eliminate the processing technology of hot rolled tube wall thickness difference, is an important equipment of the production of large diameter hydraulic cylinder.

JCB Hydraulic Cylinder Tube

JCB Hydraulic Cylinder Tube,Boring Hydraulic Steel Tube,Hydraulic Steel Tube,Steel Tube Hydraulic Cylinder

Yangzhou Yinhe Machinery Co., Ltd , http://www.yinhesteeltubes.com