When using the manure machine should pay attention to what details
Many large-scale engineering operations, such as the treatment of biogas, are inseparable from the manure removal machine. However, the vacuum pump is one of the most critical factors in pumping manure. Therefore, the maintenance of vacuum pumps for manure pumps, as well as the handling of problems such as installation, commissioning and breakdowns, are often very tricky. Next, let professional people analyze what kind of arguments and vacuum pumps for manure extraction machines need to pay attention to.
First of all, let the experts analyze what the specific physical principles are in the working process of the vacuum pump of the excrement machine. It should be noted that the shaft rotor from the vacuum pump generates a certain amount of centrifugal gravity during the full rotation. Then, this centrifugal force will allow the rotating plate to fully abut against the inner wall of the vacuum pump to move. Friction occurs during movement, which causes rapid expansion of the gas in the container inside the vacuum pump. Because the negative pressure fully inhales the external gas into the internal space, the gas is fully isolated at this time. If the rotating plate continues to rotate at high speed, then the rotor is also rotating at high speed. At this time, the gas that was isolated was in a state of negative pressure, so it was strengthened rapidly and was squeezed sufficiently. In such cases, it is quickly discharged outside the vacuum pump. In this case, the gas inside the vacuum pump will form a very good vacuum, so this is also the working principle.
Then, when necessary, the need for care and maintenance of the manure removal machine is also crucial. In the process of care and maintenance, the first thing to look for is whether the air intake system is tight or not. At this time, some gases can be dredged for experiments and inspections. If there is a sizzling sound that leaks anywhere, it needs to be reinforced and tight. What needs to be known at this time is that the discharge port of oil and gas separator oil body must be higher than the inlet port of the oil body, and the oil body is allowed to inhale freely through the state of siphon. If it is in a relatively cold area, then at this time, it is necessary to provide antifreeze lubricant for the circulation of the oil body. Because, if you lose the lubricating oil, then the oil body pipeline will burst or even deformed.
Another point worth mentioning is that during the maintenance and maintenance as well as the repair process, it is necessary to always check whether the total oil volume of the vacuum pump is within the range of the scale, and what needs to be known is the quality of the oil. When examining the quality of the oil body, it is necessary to see whether the degree of solidification is high. So the transparent oil quality is higher than the milky white oil quality. If there is emulsification, it needs to replace the new oil in time. Then, the water vapor separated by the steam separator also needs to be discharged in time, otherwise it will have a negative effect on the gas discharge.
The above is the explanation and detailed explanation of the vacuum pump of the manure extraction machine used by technical experts. Well, these general contents are also very good for people in the concrete operation and construction process, and they hope that people can read it carefully.
Transfer Stickers, UV Transfer Stickers,Transfer Decals,Custom Transfer Decals,Vinyl Transfer Stickers
ZZ Sticker , https://www.zzsticker.com