Two people were killed in road collapse accident in Harbin

Two persons were killed diesel generators in diesel road collapse accident in Harbin | Diesel generator prices / 2012-08-15

According to relevant departments in Harbin, two people were killed on the road collapse accident at No. 90 Liaoyang Street in Nangang District on the 14th.
According to reports, witnesses and surveillance videos confirmed that 4 people had fallen into the collapsed area. After the fire officers and soldiers and police officers fully rescued, all four of them were rescued. After salvaging 2 people out of danger, 2 people were killed.
At present, the backfill of collapsed roads and the restoration of sewage pipelines are underway, and the cause of the collapse is under investigation.
Next:Installation, use and regulation of marine diesel generator sets
Previous:Thirty passengers at Kunming Airport in Yunnan blocked other flights due to flight delays

For KATO Cylinder Seal Kit

The replacement process of excavator hydraulic cylinder is as follows:
1. Turn off the hydraulic system: Before replacing the hydraulic cylinder, it is necessary to turn off the system to avoid liquid leakage in the hydraulic system.
2. Disassembling the hydraulic cylinder: Disassembling the hydraulic cylinder requires the use of tools such as wrenches, screwdrivers, etc. Firstly, the hydraulic pipeline needs to be removed, and then the bolts of the hydraulic cylinder need to be removed to remove the hydraulic cylinder from the machine.
3. Check the hydraulic cylinder: Check if there is any damage to the hydraulic cylinder, and if there is any damage, replace it.
4. Install a new hydraulic cylinder: Install the new hydraulic cylinder onto the machine and secure the cylinder with bolts.
5. Connect hydraulic pipeline: Connect the hydraulic pipeline to the hydraulic cylinder, pay attention to the position and direction of the connection, and ensure that the connection is secure.
6. Test system: after replacing the hydraulic cylinder, it is necessary to test whether the system operates normally, check whether the hydraulic cylinder operates normally, and deal with any problem in time.
7. Cleaning work: Clean the liquid and debris in the hydraulic system to ensure that the system is clean and avoid any impact on the system.


For Kato Cylinder Seal Kit,For Kato Center Joint Seal Kit,Center Joint Seal Kit,Repair Kit For Kato Joystick

Safe Seal Technology Co., Ltd. , https://www.jsspreals.com